Thinking Blade Knives

Knives: Damascus Utvikling

Damascus Utvikling

Photo By Mitch Lum

The Damascus Utvikling is a full tang knife made VG10 clad Damascus steel. The core edge is hardened and cryoquenched to RC 60-61. The 16 layers of 410 and nickel stainless improve toughness while adding beauty. The blade is flat ground with a deep false edge for excellent cutting performance even for through cuts.

The Damascus Utvikling comes with a custom Kydex sheath from Blade-Tech.

Buy Damascus Utvikling

Blade-Tech Sheath

Matching the versatility of the Utvikling is the custom designed Blade-Tech* Kydex* sheath.

1 Push your blade into the Blade-Tech sheath until you hear a click. You blade is secure without, straps, buttons, or buckles.

2 Use the two sets of spacers, screws, and to fasten the sheath to the mount. Experiment with mounting options till you find the best fit.

3 The mount can be adjusted to fit belts and straps of different sizes. Us a screwdriver to loosen and move the slider bar, but be careful not to overtighten.

4 To fasten the mount to a strap or belt, press both tabs on the mount, swing the mount open, slide the mount into position, and then close the mount until the two tabs click.

5 Slide the tab lock into position and you are ready to go.

*Blade-Tech and Kydex are the trademarks of their respective owners.

Blade-Tech Sheath

© Copyright 2007. ThinkingBlade Knives. All rights reserved. | PO Box 7296, Bellevue, WA 98008

Fax: 1.425.649.0333 |

Photography © Copyright 2007. Jeff Bowlin Photography. Mitch Lum Photography.